Quick Answer: Why Must You Always Use A Torque Wrench When Tightening Alloy Wheels?

How much torque does it take to remove a lug nut?

A quick glance at a lug nut torque chart shows that most lug nuts should be torqued between 80 and 100 ft-lbs.

Some require less torque, others more..

Can a torque wrench be used to loosen bolts?

How to use torque wrenches ? A torque wrench is a tightening tool. It is a very sensitive and precise tightening tool, and should never been used to loosen bolts. Handle your torque wrench as carefully as you treat a measurement instrument!

Should you use an impact wrench to tighten lug nuts?

While impact wrenches can be used to tighten lug nuts, it’s usually not recommended because there’s always the possibility of using too much torque. The result can be stripped or stretched threads.

Can cordless impact drivers remove Lugnuts?

You can remove lug nuts of your car using an impact driver provided the nuts are tightened at the right amount of torque (80 to 100lb-ft) and your impact driver’s output torque is higher than 100lb-ft. In practice, however, rusted/frozen and over-torqued lug nuts will not break loose with a cordless impact driver.

What happens if you don’t tighten your lug nuts?

If the lug nuts or bolts are loose, the wheel will not be held snugly against the hub of the vehicle. When the vehicle is driven, the wheels will shake. The shaking will be felt in the steering, and likely throughout the whole car.

Why is it important to torque wheels to their proper setting?

When installing the wheels on a vehicle after servicing, it is important to torque the lug nuts properly. Lug nuts that are not tightened correctly can ruin wheels, affect rotor runout and can be deadly if the wheel comes off or studs snap. Over-torqueing the lug nuts does not affect runout immediately.

How tight should car wheel nuts be with a torque wrench?

The general rule for steel wheel lug nut torque is usually around 80ft/lb, and for aluminum wheel is around 100ft/lb. It can be used in most cases, but we would still prefer you to research for the exact torque for every particular model before you start working.

How tight should car wheel nuts be?

Typically most cars run around 80 to 100 ft-lbs of torque on a dry stud but you should really make sure you have the correct number for your vehicle and a decent quality torque wrench to ensure that you get it right. I also recommend re-torquing the lugs after about 200 miles of driving, especially on alloy wheels.

What happens if you over tighten wheel nuts?

Excessively tightened lug nuts can strip the threads, distort brake rotors, damage the wheel, and possibly shear off the lug stud. Insufficiently tightened lug nuts can come loose, with catastrophic consequences.

Do you really need a torque wrench for wheels?

While a torque wrench is not absolutely required, it’s a good idea. You need to ensure the wheel is evenly clamped onto the hub. This prevents the wheel from warping and causing other issues. Using the lug wrench which comes with the car will get you down the road.