Quick Answer: What Is A 13 Amp Fuse Used For?

How many watts can a 5 amp fuse take?

Fuse ratings45 AMPFor circuits of more than 13kw (13000 w)13 AMPFor appliances between 700 and 3000w (3kw)5 AMPFor lighting circuits.

The maximum permissible load of a lighting circuit is 1200w or 12* 100 watt lamps3 AMPFor appliances up to 700 watts, such as table lamps and alarm clocks3 more rows.

What FUSE do I need for 12v?

There are 3 types of 12v fuses I recommend. They are Spade Fuses, ANL fuses, and Re-settable Breakers. Spade fuses are the fuses that you’ll commonly find in your car’s fuse panel and are typically for items run out of your distribution block and less than 30 amps (in our case.

Can I plug a 13 amp plug into a 10 amp extension lead?

If you try to plug in a hair dryer (10A) and a kettle (13A) you will quickly overload the extension lead. Running a number of low-Amp items together is fine (laptops, printers, and games consoles). It’s important to check the current rating before plugging appliances into it. Most have a rating of 13 A, 10 A or less.

How many watts can I use in one plug?

The typical American wall outlet can handle a maximum of 15 Amps, or 15 amps * 120 Volts = 1800 watts. There are also 20 Amp outlets (which can accept the 15 Amp maximum plugs as well), allowing 2400 watts. However, the National Electric Code (NEC) says that no more than 80% of that should be used.

How do I know what amp fuse to use?

You’ll usually find the fuse rating on the side of your fuse, which will be given in amps. Fuse rating is the amount of current needed for the fuse to blow or break. When this happens, it stops the electrical power from flowing through the electrical circuit.

What happens if I use the wrong fuse?

Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. … If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.

Can I replace a 10amp fuse with a 13 amp?

If you replaced it with 13A fuse, it will allow current more than 10A, so it may possible that other components may get damage due excessive current flow than specified. If TV components can sustain up to 13 A current, you can replace it. … You can put a smaller fuse in with the same “speed” rating.

Can I replace a 5amp fuse with a 13 amp?

A 13 will be ok in a 5amp device as long as its ok and your going to get the correct ampage soon. Not a good idea at all, if there is a fault with them you risk a shock or a fire.

Can I replace a fuse with a higher amp?

In general, NO. Replacing a fuse with a higher-amp fuse is a very bad idea and can lead to fires. Fuses (and circuit breakers) are rated such that they blow or trip before any part of the circuit gets to a dangerous current. … Fix the underlying problem, and you won’t have any more blown fuses.

Can I use a 10 amp fuse instead of 15?

You can, it will may immediately blow, but it won’t hurt anything other than the fuse. … What you don’t want to do is use a higher amp fuse or something like a jumper wire. That could damage the wiring and start a fire.

Can I put a 3 amp fuse in a 10 amp plug?

The 13A fuse in place of a 10A fuse wouldn’t directly cause any problem – but then, if there’s a problem with the appliance you’re using, or if you plug in too many things and the current goes over 10A but under 13A, then under the new fuse the extension lead will keep working whereas the old fuse would have blown.

What size fuse do I need for 1000 watt amp?

HUH? most true 1000 wrms amps call for 80a fusing…..but yours may require less..or more, google for the manual and find out.

What amp fuse do I need for LED lights?

75mm is good for about 7.5 amps max. I generally like to have at least 100% extra rating so a 3 amp fuse max is what i would use. This should be plenty for 4 leds. If you have working leds but blow a 10A fuse i think your wiring needs checking and you will probably find your fuse is directly across the battery.

How do you tell if a 13 amp fuse is blown?

Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.

How many watts can a 13 amp fuse take?

3000 wattsIt is important to never overload a plug socket, which is 3000 watts = 13 Amps.

Can you put a 16 amp fuse in a 13 amp plug?

Yes they will. You’ll get about 150A from a 13A supply, any more than that and the fuse will probably pop but it won’t cause any damage to the machine or the supply.

What does a bad fuse look like?

A good fuse will measure near 0 Ω, while a bad fuse will measure OL Ω or ∞ Ω. … Then, probe both sides of the fuse. Both sides of a good fuse will show power, usually indicated by a red LED. If the fuse is blown, one side will show power, while the other side will show ground, usually a green LED.

Can I use a 13a fuse in a 3a plug?

For an appliance rated as 700W or less, a 3A fuse should be fitted. For appliances above 700W, a 13A fuse should be fitted. … BS1363 has standardised on just two preferred fuse ratings, 3A and 13A, however any fuse rating up to 13A can still be used.

Can I put a 10amp fuse in a 5 amp?

Possibly yes. What ever is wired into that 5 amp slot is rated for a max of 5 amps, overdrawing more than 5 amps by removing the 5 amp fuse and putting in a 10 amp fuse can possibly short out a circuit.

How many watts can a 30 amp fuse handle?

7,200 watts30-amp 240-volt circuit: 30 amps x 240 volts = 7,200 watts.