Question: Can You Use A Torque Wrench To Remove Lug Nuts?

Can you use a torque wrench to remove bolts?

How to use torque wrenches .

A torque wrench is a tightening tool.

It is a very sensitive and precise tightening tool, and should never been used to loosen bolts.

Handle your torque wrench as carefully as you treat a measurement instrument!.

What should you not do with a torque wrench?

Users should never put a pipe or any other kind of extension onto a torque wrench handle as doing so can seriously damage the tool and make it inaccurate, never mind the potential safety hazard.

What size drive torque wrench for lug nuts?

1/2 inchA 1/2 inch torque wrench with a working range of 30 to 160 ft lbs is the correct size tool for lug nuts and other heavy fasteners.

Can you over tighten lug nuts by hand?

The problem with impact guns is they’re so powerful, one can easily over-tighten the nuts. A torque wrench measures the tightening force applied, allowing the user to accurately follow the manufacturer’s recommendations. If your lug nuts were tightened by hand I wouldn’t be too concerned.

What happens if you drop a torque wrench?

One accidental drop to the shop floor probably isn’t a big deal, but repeated drops can affect the wrench’s calibration. This is true even if it doesn’t show signs of damage. … Even if you have never dropped or otherwise abused your torque wrench, it’s always a good idea to have it professional checked regularly.

How many pounds of torque do I need to remove lug nuts?

And when you look at that, and realize that the average torque required on a lug nut, to hold the wheel on, is 80 to 90 ft-lbs, well you can imagine how over-tightened some of these lug nuts are. Now that’s a problem because it almost guarantees warped brake rotors.

Do I really need a torque wrench?

If you plan to do any major work on your engine or on some major powertrain components, you absolutely need a torque wrench. Overtightening cylinder-head bolts, for instance, can easily cause expensive damage and catastrophic coolant loss. Too-tight exhaust manifold bolts can cause the manifold to crack.

Can you use regular sockets with a torque wrench?

All torque wrenches come with a square drive where you can fit a socket. Normally when you buy a torque wrench you will not get a socket. You can not use it without a socket.

Should you double click a torque wrench?

One of the reasons for doing this, though, might be when you are torquing, the fastener itself becomes slightly bound up, not giving a perfectly correct reading. By double clicking, you are allowing the fastener to rest for a second, then you are back at it to get the proper amount of torque there.

Will a cordless impact wrench remove lug nuts?

Can an Impact Driver Remove Lug Nuts? Yes, technically. You would need to use a hex shaft to square drive adapter in order to attach a lug nut socket to the tool. However, an impact driver may not have enough torque to break loose a lug nut that’s rusted/frozen or over tightened.

Should you use an impact wrench to tighten lug nuts?

When loosening a lug nut you’ll notice the socket attached to the impact wrench moving slowly as the lug nut is loosened and then quickly when it’s loose. Be cautious when tightening lug nuts using an impact as it’s easy to over torque them—which can stretch or even strip the threads.

How should you store a torque wrench?

Storage: All torque instruments should be stored in their original case. Avoid any torque wrench storage locations that are subject to high or low temperatures and high humidity. “Clicker” style torque wrenches should always be turned down and stored at the torque wrenches lowest possible setting.

Does an extension affect a torque wrench?

Adapters will affect the torque wrench setting if the distance changes between the fastener and the torque wrench handle. A straight extension will have no effect on the torque wrench setting.

Why does my torque wrench not click?

Test it with a bolt thats already tight, but set the wrench lower than the bolt should be tightened to to make sure it still clicks. If it doesn’t click before the bolt turns, it likely needs to be opened up to re-position the bearing.

Can you break torque with a torque wrench?

Tighten fasteners in two steps—first to half torque and then to final torque. Clean dirty or rusted threads before tightening, but don’t lubricate them unless instructed to by the equipment manufacturer. … Never use your torque wrench as a breaker bar—that’ll damage the torque mechanism.

How does click type torque wrench work?

When a clicker wrench is pulled to the point of the torque setting, the lever inside the wrench rolls over a cam and hits the inside of the wrench handle wall. This effect makes the “click” sound, and tells the operator that they have reached the desired torque value.